ISO Standards For Paper, Pulps, Paper Board and other Paper Products

ISO 4046-1:2002
Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index

ISO 4046-3:2002
Paper, board, pulps and related terms — Vocabulary — Part 3: Paper-making terminology

ISO 4094:2005
Paper, board and pulps — International calibration of testing apparatus — Nomination and acceptance of standardizing and authorized laboratories

ISO 187:1990
Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples

ISO 302:2004
Pulps — Determination of Kappa number

ISO 638:2008
Paper, board and pulps — Determination of dry matter content — Oven-drying method

ISO 692:1982
Pulps — Determination of alkali solubility

ISO 699:1982
Pulps — Determination of alkali resistance

ISO/PRF 776
Pulps — Determination of acid-insoluble ash

ISO 776:1982
Pulps — Determination of acid-insoluble ash

ISO 777:2005
Paper, board and pulp — Determination of acid-soluble calcium

ISO 778:2005
Paper, board and pulp — Determination of acid-soluble copper

ISO 779:2005
Paper, board and pulp — Determination of acid-soluble iron

ISO 801-1:1994
Pulps — Determination of saleable mass in lots — Part 1: Pulp baled in sheet form

ISO 801-2:1994
Pulps — Determination of saleable mass in lots — Part 2: Pulps (such as flash-dried pulps) baled in slabs

ISO 801-3:1994
Pulps — Determination of saleable mass in lots — Part 3: Unitized bales

ISO 1762:2001
Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C

ISO 1830:2005
Paper, board and pulps — Determination of acid-soluble manganese

ISO 2469:2007
Paper, board and pulps — Measurement of diffuse radiance factor

ISO/CD 2469
Paper, board and pulps — Measurement of diffuse radiance factor

ISO 2470-1:2009
Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)

ISO 2470-2:2008
Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness)

ISO 3260:1982
Pulps — Determination of chlorine consumption (Degree of delignification)

ISO 3688:1999
Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)

ISO 4046-1:2002
Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index

ISO 4046-2:2002
Paper, board, pulps and related terms — Vocabulary — Part 2: Pulping terminology

ISO 4046-5:2002
Paper, board, pulps and related terms — Vocabulary — Part 5: Properties of pulp, paper and board

ISO 4094:2005
Paper, board and pulps — International calibration of testing apparatus — Nomination and acceptance of standardizing and authorized laboratories

ISO 4119:1995
Pulps — Determination of stock concentration

ISO 5263-1:2004
Pulps — Laboratory wet disintegration — Part 1: Disintegration of chemical pulps

ISO 5263-2:2004
Pulps — Laboratory wet disintegration — Part 2: Disintegration of mechanical pulps at 20 degrees C

ISO 5263-3:2004
Pulps — Laboratory wet disintegration — Part 3: Disintegration of mechanical pulps at > 85 degrees C

ISO 5264-1:1979
Pulps — Laboratory beating — Part 1: Valley beater method

ISO 5264-2:2011
Pulps — Laboratory beating — Part 2: PFI mill method

ISO 5267-1:1999
Pulps — Determination of drainability — Part 1: Schopper-Riegler method

ISO 5267-1:1999/Cor 1:2001

ISO 5267-2:2001
Pulps — Determination of drainability — Part 2: “Canadian Standard” freeness method

ISO 5269-1:2005
Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method

ISO 5269-2:2004
Pulps — Preparation of laboratory sheets for physical testing — Part 2: Rapid-Köthen method

ISO 5269-3:2008
Pulps — Preparation of laboratory sheets for physical testing — Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system

ISO 5270:1998
Pulps — Laboratory sheets — Determination of physical properties

ISO/DIS 5270
Pulps — Laboratory sheets — Determination of physical properties

ISO 5350-1:2006
Pulps — Estimation of dirt and shives — Part 1: Inspection of laboratory sheets by transmitted light

ISO 5350-2:2006
Pulps — Estimation of dirt and shives — Part 2: Inspection of mill sheeted pulp by transmitted light

ISO 5350-3:2007
Pulps – Estimation of dirt and shives — Part 3: Visual inspection by reflected light using Equivalent Black Area (EBA) method

ISO 5350-4:2006
Pulps — Estimation of dirt and shives — Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method

ISO 5351:2010
Pulps — Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution

ISO 6587:1992
Paper, board and pulps — Determination of conductivity of aqueous extracts

ISO 6588-1:2005
Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction

ISO 6588-2:2005
Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction

ISO 7213:1981
Pulps — Sampling for testing

ISO/CD 8784-1
Pulp, paper and board — Microbiological examination — Part 1: Enumeration of bacteria and bacterial spores based on disintegration

ISO 8784-1:2005
Pulp, paper and board — Microbiological examination — Part 1: Total count of bacteria, yeast and mould based on disintegration

ISO/CD 8784-2
Pulp, paper and board — Microbiological examination — Part 2: Enumeration of yeast and mould on surface

ISO 9184-1:1990
Paper, board and pulps — Fibre furnish analysis — Part 1: General method

ISO 9184-2:1990
Paper, board and pulps — Fibre furnish analysis — Part 2: Staining guide

ISO 9184-3:1990
Paper, board and pulps — Fibre furnish analysis — Part 3: Herzberg staining test

ISO 9184-4:1990
Paper, board and pulps — Fibre furnish analysis — Part 4: Graff “C” staining test

ISO 9184-5:1990
Paper, board and pulps — Fibre furnish analysis — Part 5: Lofton-Merritt staining test (modification of Wisbar)

ISO 9184-6:1994
Paper, board and pulps — Fibre furnish analysis — Part 6: Determination of fibre coarseness

ISO 9184-7:1994
Paper, board and pulps — Fibre furnish analysis — Part 7: Determination of weight factor

ISO 9197:2006
Paper, board and pulps — Determination of water-soluble chlorides

ISO 9198:2001
Paper, board and pulp — Determination of water-soluble sulfates

ISO 9416:2009
Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)

ISO 9668:1990
Pulps — Determination of magnesium content — Flame atomic absorption spectrometric method

ISO 10376:2011
Pulps — Determination of mass fraction of fines

ISO/WD TR 10688
Paper, board and pulps — Basic equations for optical properties

ISO 10775:1995
Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method

ISO/NP TR 11371
Pulps — Basic guidelines for refining

ISO 11480:1997
Pulp, paper and board — Determination of total chlorine and organically bound chlorine

ISO/FDIS 12830
Paper, board and pulps — Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium

ISO/NP TR 13159
Pulps – Basic guidelines for fibre characterization

ISO 14436:2010
Pulps — Standard tap water for drainability measurements — Conductivity 40 mS/m to 150 mS/m

ISO 14453:1997
Pulps — Determination of acetone-soluble matter

ISO 14487:1997
Pulps — Standard water for physical testing

ISO 15318:1999
Pulp, paper and board — Determination of 7 specified polychlorinated biphenyls (PCB)

ISO 15320:2003
Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract

ISO/FDIS 15320
Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract

ISO 15360-1:2000
Recycled pulps — Estimation of Stickies and Plastics — Part 1: Visual method

ISO 15360-2:2001
Recycled pulps — Estimation of Stickies and Plastics — Part 2: Image analysis method

ISO 15360-2:2001/Cor 1:2007

ISO 15361:2000
Pulps — Determination of zero-span tensile strength, wet or dry

ISO 16065-1:2001
Pulps — Determination of fibre length by automated optical analysis — Part 1: Polarized light method

ISO 16065-2:2007
Pulps — Determination of fibre length by automated optical analysis — Part 2: Unpolarized light method

ISO 17812:2007
Paper, board and pulps — Determination of total magnesium, total calcium, total manganese, total iron and total copper

ISO 22754:2008
Pulp and paper — Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement

ISO 23713:2005
Pulps — Determination of fibre coarseness by automated optical analysis — Polarized light method

ISO 23714:2007
Pulps — Determination of water retention value (WRV)

ISO/TR 24498:2006
Paper, board and pulps — Estimation of uncertainty for test methods

ISO/TR 25477:2008
Paper, board and pulps – Basic guidelines for image analysis measurements

ISO 29681:2009
Paper, board and pulps — Determination of pH of salted water extracts

ISO 186:2002
Paper and board — Sampling to determine average quality

ISO 187:1990
Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples

ISO 217:2008
Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction

ISO 287:2009
Paper and board — Determination of moisture content of a lot — Oven-drying method

ISO/FDIS 534
Paper and board — Determination of thickness, density and specific volume

ISO 534:2005
Paper and board — Determination of thickness, density and specific volume

ISO 535:1991
Paper and board — Determination of water absorptiveness — Cobb method

ISO 536:1995
Paper and board — Determination of grammage

ISO 638:2008
Paper, board and pulps — Determination of dry matter content — Oven-drying method

ISO 777:2005
Paper, board and pulp — Determination of acid-soluble calcium

ISO 778:2005
Paper, board and pulp — Determination of acid-soluble copper

ISO 779:2005
Paper, board and pulp — Determination of acid-soluble iron

ISO 1830:2005
Paper, board and pulps — Determination of acid-soluble manganese

ISO 1924-2:2008
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)

ISO 1924-3:2005
Paper and board — Determination of tensile properties — Part 3: Constant rate of elongation method (100 mm/min)

ISO 1974:1990
Paper — Determination of tearing resistance (Elmendorf method)

ISO/DIS 1974
Paper — Determination of tearing resistance (Elmendorf method)

ISO 2144:1997
Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C

ISO/CD 2469
Paper, board and pulps — Measurement of diffuse radiance factor

ISO 2469:2007
Paper, board and pulps — Measurement of diffuse radiance factor

ISO 2470-1:2009
Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)

ISO 2470-2:2008
Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness)

ISO 2471:2008
Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method

ISO 2493:1992
Paper and board — Determination of resistance to bending

ISO 2493-1:2010
Paper and board — Determination of bending resistance — Part 1: Constant rate of deflection

ISO/FDIS 2493-2
Paper and board — Determination of resistance to bending — Part 2: Taber-type tester

ISO 2528:1995
Sheet materials — Determination of water vapour transmission rate — Gravimetric (dish) method

ISO 2758:2001
Paper — Determination of bursting strength

ISO 2759:2001
Board — Determination of bursting strength

ISO 3034:2011
Corrugated fibreboard — Determination of single sheet thickness

ISO 3035:1982
Single-faced and single-wall corrugated fibreboard — Determination of flat crush resistance

ISO/FDIS 3035
Corrugated fibreboard — Determination of flat crush resistance

ISO 3036:1975
Board — Determination of puncture resistance

ISO 3037:2007
Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)

ISO 3038:1975
Corrugated fibreboard — Determination of the water resistance of the glue bond by immersion

ISO 3039:2010
Corrugated fibreboard — Determination of grammage of the component papers after separation

ISO 3689:1983
Paper and board — Determination of bursting strength after immersion in water

ISO/FDIS 3781
Paper and board — Determination of tensile strength after immersion in water

ISO 3781:1983
Paper and board — Determination of tensile strength after immersion in water

ISO 3783:2006
Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model)

ISO 4046-1:2002
Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index

ISO 4046-4:2002
Paper, board, pulps and related terms — Vocabulary — Part 4: Paper and board grades and converted products

ISO 4046-5:2002
Paper, board, pulps and related terms — Vocabulary — Part 5: Properties of pulp, paper and board

ISO 4094:2005
Paper, board and pulps — International calibration of testing apparatus — Nomination and acceptance of standardizing and authorized laboratories

ISO 5626:1993
Paper — Determination of folding endurance

ISO 5627:1995
Paper and board — Determination of smoothness (Bekk method)

ISO 5627:1995/Cor 1:2002

ISO/DIS 5628
Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods

ISO 5628:1990
Paper and board — Determination of bending stiffness by static methods — General principles

ISO 5629:1983
Paper and board — Determination of bending stiffness — Resonance method

ISO 5630-1:1991
Paper and board — Accelerated ageing — Part 1: Dry heat treatment at 105 degrees C

ISO 5630-3:1996
Paper and board — Accelerated ageing — Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity

ISO 5630-4:1986
Paper and board — Accelerated ageing — Part 4: Dry heat treatment at 120 or 150 degrees C

ISO 5630-5:2008
Paper and board — Accelerated ageing — Part 5: Exposure to elevated temperature at 100 degrees C

ISO 5630-6:2009
Paper and board — Accelerated ageing — Part 6: Exposure to atmospheric pollution (nitrogen dioxide)

ISO/WD 5630-7
Paper and board — Accelerated ageing — Part 7: Exposure to light

ISO 5631-1:2009
Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees)

ISO 5631-2:2008
Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)

ISO 5631-3:2008
Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees)

ISO 5633:1983
Paper and board — Determination of resistance to water penetration

ISO 5635:1978
Paper — Measurement of dimensional change after immersion in water

ISO 5636-1:1984
Paper and board — Determination of air permeance (medium range) — Part 1: General method

ISO 5636-3:1992
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method

ISO/CD 5636-3
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method

ISO 5636-4:2005
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method

ISO/CD 5636-4
Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method

ISO/CD 5636-5
Paper and board — Determination of air permeance and air resistance (medium range) — Part 5: Gurley method

ISO 5636-5:2003
Paper and board — Determination of air permeance and air resistance (medium range) — Part 5: Gurley method

ISO/WD 5636-6
Paper and board — Determination of air permeance and air resistance (medium range) — Part 6: Oken method

ISO 5637:1989
Paper and board — Determination of water absorption after immersion in water

ISO 5638:1978
Solid fibreboard — Determination of grammage of single layers

ISO 5647:1990
Paper and board — Determination of titanium dioxide content

ISO 6587:1992
Paper, board and pulps — Determination of conductivity of aqueous extracts

ISO 6588-1:2005
Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction

ISO 6588-2:2005
Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction

ISO 7263:2011
Corrugating medium — Determination of the flat crush resistance after laboratory fluting

ISO 8226-1:1994
Paper and board — Measurement of hygroexpansivity — Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %

ISO 8226-2:1990
Paper and board — Measurement of hygroexpansivity — Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %

ISO 8254-1:2009
Paper and board — Measurement of specular gloss — Part 1: 75 degree gloss with a converging beam, TAPPI method

ISO 8254-2:2003
Paper and board — Measurement of specular gloss — Part 2: 75 degree gloss with a parallel beam, DIN method

ISO 8254-3:2004
Paper and board — Measurement of specular gloss — Part 3: 20 degree gloss with a converging beam, TAPPI method

ISO 8784-1:2005
Pulp, paper and board — Microbiological examination — Part 1: Total count of bacteria, yeast and mould based on disintegration

ISO/CD 8784-1
Pulp, paper and board — Microbiological examination — Part 1: Enumeration of bacteria and bacterial spores based on disintegration

ISO/CD 8784-2
Pulp, paper and board — Microbiological examination — Part 2: Enumeration of yeast and mould on surface

ISO 8787:1986
Paper and board — Determination of capillary rise — Klemm method

ISO 8791-1:1986
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method

ISO 8791-2:1990
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method

ISO/CD 8791-2
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method

ISO 8791-3:2005
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method

ISO 8791-4:2007
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method